A00194401 Dishwasher Motor Capacitor
A00194401 Dishwasher Motor Capacitor
Keep your dishwasher performing at its best with this reliable motor capacitor. Designed to support the pump and drive motor during startup and throughout the wash cycle, it helps deliver consistent spray action, steady motor speed, and reliable heat management. Encased in a durable aluminum housing with moisture- and heat-resistant construction, this capacitor is built to withstand the demanding environment inside a modern dishwasher.
From XPart Supply Ltd., a trusted name in dishwasher parts, this motor capacitor is engineered as a direct, high-quality replacement for a wide range of standard dishwasher motors. It’s a practical choice for anyone maintaining or repairing a busy kitchen, offering peace of mind that the motor will start reliably and run smoothly across many cycles.
Key benefits that set it apart
- Robust, compact design: A cylindrical aluminum can with a sealed end cap provides strong protection against heat, moisture, and detergents while fitting into tight appliance compartments.
- Secure wiring: Two quick-connect terminals allow quick, low-resistance connections for a dependable electrical path and easy installation.
- Reliable startup and running: Precisely engineered capacitance supports consistent motor torque at start-up and smooth operation through the wash cycle, reducing startup delay and motor strain.
- OEM-minded reliability: Built to meet the demands of regular dishwashing cycles, delivering durable performance that stands up to daily use.
- Trusted brand assurance: Backed by XPart Supply Ltd.’s commitment to compatibility, quality, and customer support for dishwasher parts and accessories.
Ideal use cases
- Replacing a worn or failed run capacitor to restore reliable motor startup and prevent intermittent operation.
- Maintenance in commercial or family kitchens where dishwashers undergo frequent, high-demand cycles.
- Repair projects aiming to minimize downtime by restoring the motor’s ability to start quickly and run smoothly.
Why choose this capacitor over standard alternatives
While many generic capacitors serve basic electrical needs, this model is specifically selected for dishwasher environments. Its durable construction resists the unique combination of heat, moisture, and chemical cleaners found inside dishwashers. The two-terminal, quick-connect design simplifies installation and reduces connection resistance, helping the motor reach its intended speed more reliably than loose-lead options. For technicians and DIY enthusiasts alike, it’s a dependable, long-lasting solution that aligns with common dishwasher motor specifications without requiring adapters or modifications.
Installation and care tips
- Always disconnect the appliance from power before starting any repair work. Verify the dishwasher is completely de-energized.
- Match the capacitor’s electrical ratings with the motor requirements and the appliance’s wiring harness. Use the existing quick-connect terminals for a secure connection.
- Inspect surrounding components for wear or damage. If wires or insulation show signs of deterioration, replace them along with the capacitor to ensure safe operation.
- Secure the capacitor in its mounting location to prevent vibration or movement during cycles, then test the dishwasher through a full wash to confirm smooth operation.
Designed for durability, reliability, and straightforward installation, the A00194401 Dishwasher Motor Capacitor is a practical, long-term solution for keeping your dishwasher performing at its best. Trust XPart Supply Ltd. for parts that combine precise engineering with real-world usefulness, helping you tackle everyday appliance maintenance with confidence.
Original: $46.76
-70%$46.76
$14.03A00194401 Dishwasher Motor Capacitor
A00194401 Dishwasher Motor Capacitor
Keep your dishwasher performing at its best with this reliable motor capacitor. Designed to support the pump and drive motor during startup and throughout the wash cycle, it helps deliver consistent spray action, steady motor speed, and reliable heat management. Encased in a durable aluminum housing with moisture- and heat-resistant construction, this capacitor is built to withstand the demanding environment inside a modern dishwasher.
From XPart Supply Ltd., a trusted name in dishwasher parts, this motor capacitor is engineered as a direct, high-quality replacement for a wide range of standard dishwasher motors. It’s a practical choice for anyone maintaining or repairing a busy kitchen, offering peace of mind that the motor will start reliably and run smoothly across many cycles.
Key benefits that set it apart
- Robust, compact design: A cylindrical aluminum can with a sealed end cap provides strong protection against heat, moisture, and detergents while fitting into tight appliance compartments.
- Secure wiring: Two quick-connect terminals allow quick, low-resistance connections for a dependable electrical path and easy installation.
- Reliable startup and running: Precisely engineered capacitance supports consistent motor torque at start-up and smooth operation through the wash cycle, reducing startup delay and motor strain.
- OEM-minded reliability: Built to meet the demands of regular dishwashing cycles, delivering durable performance that stands up to daily use.
- Trusted brand assurance: Backed by XPart Supply Ltd.’s commitment to compatibility, quality, and customer support for dishwasher parts and accessories.
Ideal use cases
- Replacing a worn or failed run capacitor to restore reliable motor startup and prevent intermittent operation.
- Maintenance in commercial or family kitchens where dishwashers undergo frequent, high-demand cycles.
- Repair projects aiming to minimize downtime by restoring the motor’s ability to start quickly and run smoothly.
Why choose this capacitor over standard alternatives
While many generic capacitors serve basic electrical needs, this model is specifically selected for dishwasher environments. Its durable construction resists the unique combination of heat, moisture, and chemical cleaners found inside dishwashers. The two-terminal, quick-connect design simplifies installation and reduces connection resistance, helping the motor reach its intended speed more reliably than loose-lead options. For technicians and DIY enthusiasts alike, it’s a dependable, long-lasting solution that aligns with common dishwasher motor specifications without requiring adapters or modifications.
Installation and care tips
- Always disconnect the appliance from power before starting any repair work. Verify the dishwasher is completely de-energized.
- Match the capacitor’s electrical ratings with the motor requirements and the appliance’s wiring harness. Use the existing quick-connect terminals for a secure connection.
- Inspect surrounding components for wear or damage. If wires or insulation show signs of deterioration, replace them along with the capacitor to ensure safe operation.
- Secure the capacitor in its mounting location to prevent vibration or movement during cycles, then test the dishwasher through a full wash to confirm smooth operation.
Designed for durability, reliability, and straightforward installation, the A00194401 Dishwasher Motor Capacitor is a practical, long-term solution for keeping your dishwasher performing at its best. Trust XPart Supply Ltd. for parts that combine precise engineering with real-world usefulness, helping you tackle everyday appliance maintenance with confidence.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
A00194401 Dishwasher Motor Capacitor
Keep your dishwasher performing at its best with this reliable motor capacitor. Designed to support the pump and drive motor during startup and throughout the wash cycle, it helps deliver consistent spray action, steady motor speed, and reliable heat management. Encased in a durable aluminum housing with moisture- and heat-resistant construction, this capacitor is built to withstand the demanding environment inside a modern dishwasher.
From XPart Supply Ltd., a trusted name in dishwasher parts, this motor capacitor is engineered as a direct, high-quality replacement for a wide range of standard dishwasher motors. It’s a practical choice for anyone maintaining or repairing a busy kitchen, offering peace of mind that the motor will start reliably and run smoothly across many cycles.
Key benefits that set it apart
- Robust, compact design: A cylindrical aluminum can with a sealed end cap provides strong protection against heat, moisture, and detergents while fitting into tight appliance compartments.
- Secure wiring: Two quick-connect terminals allow quick, low-resistance connections for a dependable electrical path and easy installation.
- Reliable startup and running: Precisely engineered capacitance supports consistent motor torque at start-up and smooth operation through the wash cycle, reducing startup delay and motor strain.
- OEM-minded reliability: Built to meet the demands of regular dishwashing cycles, delivering durable performance that stands up to daily use.
- Trusted brand assurance: Backed by XPart Supply Ltd.’s commitment to compatibility, quality, and customer support for dishwasher parts and accessories.
Ideal use cases
- Replacing a worn or failed run capacitor to restore reliable motor startup and prevent intermittent operation.
- Maintenance in commercial or family kitchens where dishwashers undergo frequent, high-demand cycles.
- Repair projects aiming to minimize downtime by restoring the motor’s ability to start quickly and run smoothly.
Why choose this capacitor over standard alternatives
While many generic capacitors serve basic electrical needs, this model is specifically selected for dishwasher environments. Its durable construction resists the unique combination of heat, moisture, and chemical cleaners found inside dishwashers. The two-terminal, quick-connect design simplifies installation and reduces connection resistance, helping the motor reach its intended speed more reliably than loose-lead options. For technicians and DIY enthusiasts alike, it’s a dependable, long-lasting solution that aligns with common dishwasher motor specifications without requiring adapters or modifications.
Installation and care tips
- Always disconnect the appliance from power before starting any repair work. Verify the dishwasher is completely de-energized.
- Match the capacitor’s electrical ratings with the motor requirements and the appliance’s wiring harness. Use the existing quick-connect terminals for a secure connection.
- Inspect surrounding components for wear or damage. If wires or insulation show signs of deterioration, replace them along with the capacitor to ensure safe operation.
- Secure the capacitor in its mounting location to prevent vibration or movement during cycles, then test the dishwasher through a full wash to confirm smooth operation.
Designed for durability, reliability, and straightforward installation, the A00194401 Dishwasher Motor Capacitor is a practical, long-term solution for keeping your dishwasher performing at its best. Trust XPart Supply Ltd. for parts that combine precise engineering with real-world usefulness, helping you tackle everyday appliance maintenance with confidence.
