807032601 Frigidaire Dishwasher Drain Hose – The direct fix for a Frigidaire dishwasher that won't drain (standing water in the tub after the cycle), leaks water underneath or under the sink, drains very slowly, has a visibly kinked, cracked, split, or deteriorated drain hose, or has water backing up into the dishwasher from the sink. The drain hose is the flexible tube that carries wastewater from the dishwasher's drain pump to the household drain system — typically connected to the garbage disposal inlet, air gap, or drain tailpiece under the kitchen sink. During each drain phase, the pump forces dirty water through this hose at pressure. Over time, the hose deteriorates from heat, detergent chemicals, and repeated flexing — developing cracks, splits, kinks, or internal collapses that cause leaks or drainage failures. Common failures include: cracked or split hose (water leaks onto the floor or under the cabinet), kinked hose (water can't flow — dishwasher won't drain or drains extremely slowly), clogged hose (food debris, grease, or mineral buildup restricts water flow), loose connections (water leaks at the pump end or drain end), and internal collapse (hose looks fine outside but the inner wall has collapsed, blocking flow). If your dishwasher has water pooling underneath, won't drain completely, or you see a visibly damaged hose under the sink, the drain hose needs replacement. This genuine OEM Frigidaire part fits Frigidaire, Electrolux, Kenmore, and Gibson dishwashers. Quick 15–30 minute DIY repair.