GE Washer Drain Pump WG04F10241 (Replaces WG04F12336)
WG04F10241 GE Washer Drain Pump – Fix Your Washer That Won't Drain, Has Standing Water, Makes Humming Noises, or Won't Spin
WG04F10241 GE Washer Drain Pump – The direct fix for a GE washer that won't drain (water stays in the tub after the cycle), has standing water in the drum, makes a humming or buzzing noise but won't pump water out, drains very slowly (cycle takes much longer than normal), won't spin (washer refuses to spin because the tub hasn't drained), or leaks water from the pump area. The drain pump is the electric motor-driven pump at the bottom of the washer that evacuates water from the tub after each wash, rinse, and spin phase. When the control board signals the drain cycle, the pump motor spins an impeller that creates suction, pulling water from the tub and forcing it out through the drain hose. The pump moves 15–20 gallons of water per cycle and runs multiple times during a single wash. When the pump fails, water can't exit the tub — clothes sit in standing water, the spin cycle won't engage, and the washer may display a drain error code. Common failures include: motor burnout (pump completely dead — silent, no draining), seized impeller (pump hums but won't spin — foreign object jammed), worn impeller (pump runs but drains very slowly — broken fins), bearing failure (loud grinding noise when pump activates), and intermittent failure (pump works sometimes, fails when hot). Before replacing the pump, always check the pump filter/trap for clogs — coins, buttons, and debris are the most common cause of drain issues. This genuine OEM GE part directly replaces WG04F12336. Fits GE, Hotpoint, and Kenmore front-load and top-load washers. Quick 15–30 minute DIY repair.
Select Condition
From $19.93
Original: $66.45
-70%GE Washer Drain Pump WG04F10241 (Replaces WG04F12336)—
$66.45
$19.93More Images
GE Washer Drain Pump WG04F10241 (Replaces WG04F12336)
WG04F10241 GE Washer Drain Pump – Fix Your Washer That Won't Drain, Has Standing Water, Makes Humming Noises, or Won't Spin
WG04F10241 GE Washer Drain Pump – The direct fix for a GE washer that won't drain (water stays in the tub after the cycle), has standing water in the drum, makes a humming or buzzing noise but won't pump water out, drains very slowly (cycle takes much longer than normal), won't spin (washer refuses to spin because the tub hasn't drained), or leaks water from the pump area. The drain pump is the electric motor-driven pump at the bottom of the washer that evacuates water from the tub after each wash, rinse, and spin phase. When the control board signals the drain cycle, the pump motor spins an impeller that creates suction, pulling water from the tub and forcing it out through the drain hose. The pump moves 15–20 gallons of water per cycle and runs multiple times during a single wash. When the pump fails, water can't exit the tub — clothes sit in standing water, the spin cycle won't engage, and the washer may display a drain error code. Common failures include: motor burnout (pump completely dead — silent, no draining), seized impeller (pump hums but won't spin — foreign object jammed), worn impeller (pump runs but drains very slowly — broken fins), bearing failure (loud grinding noise when pump activates), and intermittent failure (pump works sometimes, fails when hot). Before replacing the pump, always check the pump filter/trap for clogs — coins, buttons, and debris are the most common cause of drain issues. This genuine OEM GE part directly replaces WG04F12336. Fits GE, Hotpoint, and Kenmore front-load and top-load washers. Quick 15–30 minute DIY repair.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
WG04F10241 GE Washer Drain Pump – Fix Your Washer That Won't Drain, Has Standing Water, Makes Humming Noises, or Won't Spin
WG04F10241 GE Washer Drain Pump – The direct fix for a GE washer that won't drain (water stays in the tub after the cycle), has standing water in the drum, makes a humming or buzzing noise but won't pump water out, drains very slowly (cycle takes much longer than normal), won't spin (washer refuses to spin because the tub hasn't drained), or leaks water from the pump area. The drain pump is the electric motor-driven pump at the bottom of the washer that evacuates water from the tub after each wash, rinse, and spin phase. When the control board signals the drain cycle, the pump motor spins an impeller that creates suction, pulling water from the tub and forcing it out through the drain hose. The pump moves 15–20 gallons of water per cycle and runs multiple times during a single wash. When the pump fails, water can't exit the tub — clothes sit in standing water, the spin cycle won't engage, and the washer may display a drain error code. Common failures include: motor burnout (pump completely dead — silent, no draining), seized impeller (pump hums but won't spin — foreign object jammed), worn impeller (pump runs but drains very slowly — broken fins), bearing failure (loud grinding noise when pump activates), and intermittent failure (pump works sometimes, fails when hot). Before replacing the pump, always check the pump filter/trap for clogs — coins, buttons, and debris are the most common cause of drain issues. This genuine OEM GE part directly replaces WG04F12336. Fits GE, Hotpoint, and Kenmore front-load and top-load washers. Quick 15–30 minute DIY repair.
